Menu
Cart 0

Engine Parts

Angled three-quarter view of the thrust washer stack showing the curved outer rim and flat inner edge. Location hole visible on lower left. Plastic wrap partially opened, steel backing visible on underside.

Thrust washer set - TW-1072J STD - NDC - NOS
Top-down detail of four bushes: two standing showing oil hole through the wall and the wrap-type butt-joint seam, two lying flat showing the laser-etched 'P1-2401 -STD NDC' marking across the steel backing. Bronze lining visible inside.

Piston Pin Bush Set - Suzuki/Maruti - PB-1179J STD - NDC - NOS
Two bushes upright showing the bronze inner bearing surface, one tipped on its side with the PB-2401-STD NDC stamping and oil hole visible

Conrod Pin Bush - Suzuki - PB-2401J STD - NDC - NOS
Main bearing set - Mitsubishi - MS-1145GP 0.75 - NDC - NOS

Main bearing set - Mitsubishi - MS-1145GP 0.75 - NDC - NOS
Shrink-wrapped stack of crescent bearing shells shown end-on, bi-metal steel backing with copper-coloured interlayer visible on several halves

Main Bearing Set - Subaru - MS-1126GP STD - NDC - NOS
Six bushings grouped together showing bronze inner bearing surface and steel outer shell, one bushing raised showing P1-2300 STD NDC stamp on outer face

Piston Pin Bush - Subaru - PB-2304J STD - NDC - NOS
Overhead view of the sealed plastic sleeve with bearing shells fanned out, showing curved profile and dark phosphate-coloured bearing faces

Conrod Bearing - Subaru - CB-2301GP 0.50 - NDC - NOS
Sealed bearing set, three-quarter view, stacked half-shells wrapped in clear plastic film with embossed markings visible on shell tangs

Rod Bearing Set - Suzuki/Chevrolet - CB-1179A 0.50 - NDC - NOS
Top-down view of stacked bearing shells in clear shrink wrap showing half-shell profile and oil groove

Main Bearing Set - Mitsubishi - MS-1807GP 0.75 - NDC - NOS
Bearing set laid flat in sleeve showing full run of shells including flanged thrust bearings with copper-coloured sides and plain intermediate shells

Main bearing set - Subaru - MS-2304GP 0.25 - NDC - NOS
Angled view of the plastic-wrapped bearing shells showing the curved inner bearing surface and stamped outer backs with NDC logo

Main Bearing Set - Mitsubishi / Kato / Kobelco - MS-1162GP 0.50 - NDC - NOS
Main Bearing Set - Suzuki - MS-2402A 0.50 - NDC - NOS

Main Bearing Set - Suzuki - MS-2402A 0.50 - NDC - NOS
Top-down view of the bearing stack in clear plastic wrap; ten half-shell bearings nested together with one wider flanged thrust half-shell visible at the rear of the stack

Main Bearing Set - Mitsubishi - MS-1169A STD - NDC - NOS
Side view of the sealed shrink-wrapped bearing set showing all shells stacked and aligned, steel backs and tri-metal bearing surfaces visible through the clear film.

Con Rod Bearing Set - Mitsubishi - CB-1160GP 0.75 - NDC - NOS
Top-down view of the full set of curved bearing half-shells vacuum-sealed in clear plastic, bright steel backs with exposed copper-alloy lining at the parting edges

Main Bearing Set - Subaru - MS-2301GP 0.50 - NDC - NOS
Top-down view of stacked bearing shells still sealed in clear plastic sleeve, crescent profiles aligned, plain running surfaces showing light shelf discolouration

Main Bearing Set - Suzuki / Changan / Daewoo - MS-2401A 0.50 - NDC - NOS
Flat side-on view of the bearing set laid in a row inside shrink wrap, showing the curved shells nested together and the tri-metal bearing surface

Conrod Bearing - Mitsubishi - CB-1812GP 1.00 - NDC - NOS
Top-down view of the sealed plastic sleeve containing eight curved steel-backed bearing half-shells nested in a row, bearing surfaces facing up

Con-rod Bearing - Mitsubishi/Kato - CB-1812GP 0.75 - NDC - NOS