Menu
Cart 0
Main Bearing Set - Hilux / Daihatsu - 1.0 MB5563AM - King
Opposite angled three-quarter view of bearing stack showing bore face and outer steel back from other end. Confirms full set of half-shells. Plastic wrap shows age-related yellowing and crinkle.
Close-up of bearing half-shells stacked face-on, showing smooth bimetal bearing surface (silver-tone aluminium alloy overlay) with steel backing visible at edges. Plastic protective film wrapping partially visible at top. No scratches or contamination on bearing faces.
Reverse angle of bearing stack, showing rear (steel backing) side of shells in original plastic film. Some minor oxidation spotting on plastic film, no damage to bearing material itself.
Edge-on view of the stacked shell set showing bearing wall thickness profile. Original plastic shrink-wrap visible; shows some age-related brittleness and deterioration at edges, consistent with extended shelf storage.
Front three-quarter view showing stacked bearing half-shells alongside original King Engine Bearings black and silver box. Box clearly shows 'KING Engine Bearings' branding with 'Track Tough Street Smart' tagline. Bearing faces show clean, uninstalled bimetal surfaces still in original clear plastic film.

Main Bearing Set - Hilux / Daihatsu - 1.0 MB5563AM - King

Only 2 left!
Brand King
Part Number 1.0 MB5563AM
Type Main Bearing
Condition New Old Stock

Specifications

  • Country of manufacture: Israel
  • Number of pairs in set: 5 pairs (10 half-shells)
  • Groove type: 1/2 groove

Vehicle Fitment

Toyota 1Y 1.6L L4 OHV — Hilux, Hiace, LiteAce, TownAce (various years)
Toyota 2Y 1.8L L4 OHV — Hilux, Hiace, LiteAce, TownAce (various years)
Toyota 3Y 2.0L L4 OHV — Hilux, Hiace, LiteAce, TownAce (various years)
Toyota 4Y 2.2L L4 OHV — Hilux, Hiace, LiteAce, TownAce, forklifts (various years)
Daihatsu 3Y 2.0L / 4Y 2.2L L4 OHV applications

Cross References

Part Numbers Relationship
MS1407, MS-1407A, MS-1715AL, 5M8282 equivalent
11701-71020, 11701-76013, 11702-71020 OE original

Additional Information

  • Fits only a crankshaft that has been reground 1.0 mm (.040") undersize — not suitable for a standard-size crank.
  • AM-Series is King's bi-metal aluminium alloy line intended for street and marine rebuilds.
New Old Stock (NOS) — Unused part in original condition. Packaging may show age-related shelf wear. New old stock. Bearings appear unused with clean, unscratched bearing faces. Still in original clear plastic shrink-wrap, though wrapping shows age-related yellowing, brittleness and minor splitting at edges consistent with long shelf storage. Original King box shows light shelf wear and corner scuffs. Rubber and elastomer components such as belts, seals, and gaskets may harden or degrade during extended storage — inspect before fitting. Please confirm this part number suits your vehicle before purchasing.

SKU: ENG-00332

We Also Recommend

Engine Mount - Holden / Vauxhall - 01-10500 - Tenacity - NOS

Engine Mount - Holden / Vauxhall - 01-10500 - Tenacity - NOS
Close-up of individual shell showing the machined outer steel surface and the smooth white-metal lining on the inner bore surface.

Cam Bearing Set - Holden - 4C5116-STD / 5H3781 STD - Repco - NOS
Main Bearing Set - Honda / Acura - 0.25 MB570AM / MS2200 - King - NOS

Main Bearing Set - Honda / Acura - 0.25 MB570AM / MS2200 - King - NOS
Three-quarter rear view of bearing set bundle showing outer steel-backed face and crush tabs at shell edges, wrapping intact. Some text/embossing may be present on outer face but obscured by wrapping and lighting angle.

Main Bearing - BMC/Leyland/Note: - 3M1692-030 - ACL - NOS
Angled three-quarter view of the thrust washer stack showing the curved outer rim and flat inner edge. Location hole visible on lower left. Plastic wrap partially opened, steel backing visible on underside.

Thrust washer set - TW-1072J STD - NDC - NOS